Feeling tired and bored of time-consuming tasks in Minecraft? Then there is a solution that will help you to construct the Minecraft world instantly and that is the Minecraft fill command. If you don’t know much about it then don’t forget to read our whole write-up where we discuss how to fill in Minecraft and every detail of it.
In summary, to fill in Minecraft at first select the place or block in the desired location. Then hold the left mouse to fill the area or use “/fill” command in Minecraft.
Table of Contents
What Is Fill in Minecraft?
Fill is actually a command in Minecraft which helps the player to build or finish their constructional work so fast as a result the players don’t get bored of constructing the project and it also helps to save time and energy for the gamers. In fact, it’s the best way of making something in Minecraft instantly.
By using this command, you can not only make a new constitution so fast but also remove the whole chunk, water, and replace a lot of blocks with a different block which makes the fill command the most useful and best command in Minecraft.
How To Fill in Minecraft: A Step-by-Step Guide
There are a few steps that you have to follow to use the fill command in Minecraft. These steps are listed below –
Step 1: Choose a Spot To Build
The first thing is to choose a spot for building your project. The flat and open place with a lot of space will be the best spot for construction.
Step 2:Pressing The Right Button
All you have to do is click the F3 button, if any awkward action happens then press on the F3 button while holding the fn And this F3 button will show you the coordinates of the spot.
STEP 3: Beginning The Command
Just type the /fill command and go to the next step. But keep in mind that /fill commands are able to build only squares or rectangles.
STEP 4: Plotting Your Creation
There will be 3 numbers and blocks in the left corner of the screen. Then find any place where you want to build your project and apply your command by typing /fill.
STEP 5: Plotting Your Creation (CONT.)
Find the other place where you want to plot your creation and then by using the command like – /fill, plug in the numbers which work as coordinates. You have to type /fill (first set of coordinates) (second set of coordinates).
STEP 6: Choosing The Item
In this step, you have to choose and decide the material by which you want to build your structure. For this, you have to again repeat the command, which is – /fill (first set of coordinates) (second set of coordinates) (block type).
STEP 7: Pressing “ENTER”
The final step is to press the enter button from the keyboard. As a result, the structure will be built after pressing this button. But there is a limitation of creating blocks using one command which is for reducing the lag. The approximate value of this limitation is > 32768.
STEP 8: Consider Using Optional Modifiers
There are various kinds of modifiers that one can use in the Minecraft fill command. Which are –
Hollow: The main task of this is to make the hollow types rectangular from inside.
Replace : It replaces all blocks with another block. For example, /fill <set 1> <set 2> minecraft:diamond_block replace minecraft:clay
Destroy: It breaks all the blocks and turns them into items. As a result, you can pick up.
Keep: Inside the rectangle, it will fill the air and leave blocks.
Outline: The blocks which you have already chosen and placed, will be outlined if you use these modifiers after the fill command.
The Minecraft fill command is a powerful tool available on Xbox, PS4, and PE (Pocket Edition) that allows players to quickly and easily fill large areas with blocks of their choice. Players can create massive structures, terraform landscapes, and much more with just a few simple commands. Here is a step-by-step guide on how to use the fill command in Minecraft on Xbox, PS4, and PE:
Open Minecraft and load your desired world.
Go to the world options menu and select “Cheats” to turn them on for your selected world.
Use the /setblock command to place two markers on opposite corners of the area you want to fill.
Once you have set your markers, type the fill command in the chat. The basic command looks like this: “/fill <x1> <y1> <z1> <x2> <y2> <z2> <block>”.
After that, press Enter to execute the command. The selected area should now be filled with the block type you specified.
If you want to modify the fill command further, you can use additional parameters such as “replace” or “hollow”.
You can also use the fill command in conjunction with other commands, such as /clone or /execute, to create more complex structures and designs.
That’s it! With these steps, you can use the fill command in Minecraft on Xbox, PS4, and PE to quickly and easily fill large areas with blocks of your choice.
Minecraft Fill Command Example
Beginners will always find it hard to understand the Fill Command Minecraft process. The concept will become clearer to you once you go through the example list underneath. It will show you how easily you can use them and improve your overall gaming experience.
Filling a large area with a single block: /fill 0 0 0 20 20 20 minecraft:dirt. This command would fill the area between the coordinates (0,0,0) and (20,20,20) with dirt blocks.
Creating a wall or barrier: /fill 0 0 0 4 9 0 minecraft:cobblestone. This command would fill the area between the coordinates (0,0,0) and (4,9,0) with cobblestone blocks.
Replacing blocks within an area: /fill 0 0 0 10 10 10 minecraft:dirt replace minecraft:grass. This command would replace all instances of dirt within the area between the coordinates (0,0,0) and (10,10,10) with grass blocks.
These are just a few examples of how the Fill Command can be used in Minecraft. With a little creativity, the Fill Command can be used in a variety of ways to enhance gameplay and make building in Minecraft more efficient.
Tips and Tricks To Best Use of The Fill Command
Minecraft players need to modify the terrain, build structures, or create barriers and walls on a consistent basis. But it is not always so easy to make the best use of the Fill Command in Minecraft. You should check out the tips and tricks shared down below and improve your overall gameplay.
1. Plan ahead
Before using the Fill Command, players should carefully plan out the area they want to modify and the specific parameters they want to use for the command. This includes selecting the correct block type and deciding on the size and shape of the area. You should also keep in mind the potential impact on surrounding terrain and structures.
2. Use the replace option carefully
The “replace” option within the Fill Command can be a powerful way to replace all instances of a certain block within an area. However, players should use this option carefully to avoid accidentally removing important structures or terrain features. Try to test the command on a small area first to ensure that it produces the desired result.
3. Back up your world
Modifying terrain and structures with the Fill Command can have unintended consequences. A wrong move can collapse a building or block off an important pathway. So, it is a good idea to back up your Minecraft world before using the command.
4. Use relative coordinates
Using relative coordinates in the Fill Command can help players quickly fill multiple areas with the same block type. Relative coordinates help players to specify the starting point of each area relative to the previous area. You no longer need to manually input the coordinates for each area.
5. Use third-party tools
There are several third-party tools and mods available that can help players use the Fill Command more efficiently. Minecraft world-editing tools or command generators are good examples of some trusted third-party tools. These tools can help automate repetitive tasks and save time when building in Minecraft.
Common Errors and Troubleshooting
The Fill Command in Minecraft is a very powerful and useful tool. But it can also lead to errors and mistakes if not used correctly. Here is an overview of common mistakes and errors that players may encounter when using the Fill Command, along with solutions for avoiding them.
3. Syntax errors
One of the most common errors when using the Fill Command is syntax errors. Players should make sure to follow the correct syntax and use the right parameters, including block IDs and coordinates.
Solution: Double-check the syntax of the command and ensure that all parameters are correct before executing the command.
2. Overwriting important structures
Another common mistake when using the Fill Command is accidentally overwriting important structures or terrain features.
Solution: Players can avoid this mistake by carefully selecting the area to fill. Use the “keep” parameter to preserve any important blocks or structures within the area.
3. Incorrect block type
If a player specifies an incorrect block type, the command will fail and may cause unintended consequences.
Solution: Double-check the block type before executing the command. Besides, you can also take into use third-party tools or mods to quickly identify the correct block type.
Minecraft Fill Command TNT
Players must first obtain the TNT blocks to use the fill command with TNT. Look for them in certain generated structures or craft them using gunpowder and sand. Once the TNT blocks have been obtained, players can then use the fill command to place them in a specified area.
This command will place TNT blocks in the specified area, which will explode when ignited. Players need to be cautious when using TNT because it can cause significant damage to the surrounding area. It is also important to ensure that the area being filled with TNT is in a safe location and does not pose a risk to other players or structures.
Minecraft Fill Command Replace
The Minecraft Fill Command Replace is a powerful tool that allows players to replace one type of block with another within a specified area. This command can be very useful in a number of situations, such as when a player wants to quickly and easily change the appearance of a large structure, or when they want to remove a certain type of block from an area.
Fill Command Replace: /fill <x1> <y1> <z1> <x2> <y2> <z2> <block to replace> replace <replacement block>
This command would replace all instances of stone within the area defined by the coordinates (10,10,10) and (20,20,20) with grass. It is important to note that the Fill Command Replace can only replace blocks within a specified area, and not outside of it.
Minecraft Fill Command Air
The Fill Command can be used to fill an area with any type of block, including air. This can be useful when a player wants to clear out a large area quickly or create a void for a specific purpose. The following command is:
/fill <x1> <y1> <z1> <x2> <y2> <z2> minecraft:air
This command fills the area between the coordinates (x1, y1, z1) and (x2, y2, z2) with air blocks. It is important to note that filling an area with air can have unintended consequences too. In some cases, filling an area with air may cause structures to collapse or generate unusual terrain features.
How to Fill Command in Minecraft Pocket Edition
The fill command in Minecraft Pocket Edition is exactly the same as the other edition which is – just put a backslash key and then type the command fill (i.e /fill). You also have to keep notes of the numbers which are known as coordinates and these coordinates will be placed after the fill command.
For example, if 36 40 1029 is the coordinates of one corner and 45 80 1025 is the coordinates of the other corners then the command of this will be –
/fill 36 40 1029 45 80 1025 and also have to add a space after this.
Also, you can choose any kind of block by which you want to build your project. Just type “minecraft: stone” or whatever block you want. The area will fill these blocks when gamers send the command to chat.
What Should Do If Gamers Don’t Know the Appropriate Coordinates
Sometimes the players forget to note or write down the numbers which are known as coordinates. As a result, they will get in trouble while using the fill command. But there is also another way to resolve this problem. Which is –
Write the command and then compose ‘ ~ ~ ~ ‘ (tiddle symbol) which will look like : /fill ~ ~ ~.
Then press another ‘~’ with the size of dimension and do this step three times.
Follow the command with the types of blocks by which you want to fill the area.
The final output of the command will be like: ‘/fill ~ ~ ~ ~20 ~8 ~18 dirt’.
How to Fill in Minecraft Java Edition
There are two syntax for filling commands in Minecraft java edition (pc/mac) 1.13. Which are –
/fill <from> <to> <block> [outline¦hollow¦destroy¦keep] – this syntax is used for filling a region with a type of block.
/fill <from> <to> <block> replace <newTileName> – this one is used for replacing blocks with other types of blocks. And for Java Edition (PC/Mac) 1.8, 1.9, 1.10, 1.11 and 1.12, there are also two types of syntax for the fill command. Which are –
/fill <x1> <y1> <z1> <x2> <y2> <z2> <block> [dataValue] [oldBlockHandling] [dataTag] – is used to fill a region with a type of block.
/fill <x1> <y1> <z1> <x2> <y2> <z2> <block> [dataValue] replace <newTileName> [newDataValue] – is used for replacing the blocks with one another.
Here, x1,y1,z1 is the starting coordinate, and x2,y2,z2 is the ending coordinate for the fill region.
Players can use the Fill Command “minecraft:air” to clear an area in Minecraft. The same command can also be used to fill an area, but with the desired block type as the parameter. The command syntax must specify starting and ending coordinates for the area to be modified.
How Do You Fill Multiple Blocks?
You can use the Fill Command parameter in order to fill multiple blocks in Minecraft. The command prompt will include the area coordinates and only modify on that specific zone. There will also be a “replace” option to replace all instances of a certain block within the area.
How Do I Activate Fill Command?
You need to open the chat window and enter the command followed by the desired parameters to activate the Fill Command. You will mention the coordinates as well as the block type to be used. Once done, click on ‘Enter’ and the Fill Command will be activated.
How Do You Fill a Floor in Minecraft?
Filling a floor in Minecraft can be done using the Fill Command. This command is especially useful for filling large areas with a single type of block. The coordinates need to be set for the floors. Once the command is executed, the specified area will be filled with the chosen block type.
Supported Platforms of fill in Minecraft
Platform
Supported versions
Java Edition (pc/mac)
Yes (1.8)
Pocket Edition
Yes (0.16.0)
Xbox 360
No
Xbox one
Yes (1.2)
PS3
No
PS4
Yes (1.14.0)
Wii U
No
Ninetendo Switch
Yes (1.5.0)
Windows 10 Edition
Yes (0.16.0)
Education Edition
Yes
Conclusion
In this write-up, we are trying to discuss all the editions of Minecraft in which you can use the fill command and how to fill in Minecraft. I hope, this will help you to use the fill command and make the construction of the project easy, convenient, and time-saving for you. If you still want to know more about it then read out our next FAQ segment.
Frequently Asked Questions on Minecraft Fill Command
In this segment, we are trying to clear the confusion more about how to fill in Minecraft. So, keep reading.
Is there any way of undoing the fill command?
No. There is no way of undoing the fill command. Once you have done this, there is no way back.
What should I do if I forget to keep notes of the coordinates?
You can use the ‘ ~ ~ ~ ‘ (tiddle symbol) in the fill command if you forget to keep notes of the coordinates.
Are commands automatically turned on in Minecraft?
No. Commands are not automatically turned on in Minecraft. You have to activate this from the settings or before or after the creation of the world.
What is the limit of blocks in the fill command in Minecraft?
There is a limitation in the fill command which affects the blocks and it is up to 32,768 blocks in volume.
Are there any modifiers available in Minecraft fill command?
Yes. There are various kinds of modifiers available in Minecraft. Which are –
Hollow: The main purpose of this is to make the hollow types rectangular from inside.
Replace: It replaces all blocks with another block. For example, /fill <set 1> <set 2> Minecraft:diamond_block replace Minecraft:clay
Destroy: It breaks all the blocks and turns them into items. As a result, you can pick it up.
Keep: Inside the rectangle, it will fill the air and leave blocks.
Outline: The blocks which you have already chosen and placed, will be outlined if you use these modifiers after the fill command.
